Cummins QSK19 Series Diesel Generator Sets

Overview

Cummins Power Generation commercial generator sets are fully integrated power generation systems providing optimum performance, reliability and versatility for stationary standby and prime power applications.

Cummins® heavy-duty engine – Rugged 4-cycle, industrial diesel delivers reliable power, low emissions and fast response to load changes.
Alternator – Several alternator sizes offer selectable motor starting capability with low reactance 2/3 pitch windings, low waveform distortion with non-linear loads and fault clearing short-circuit capability.
Permanent magnet generator (PMG) – Offers enhanced motor starting and fault clearing short-circuit capability.
Control system – The PowerCommand® electronic control is standard equipment and provides total genset system integration including automatic remote starting/stopping, precise frequency and voltage regulation, alarm and status message display, AmpSentry™ protection, output metering, auto-shutdown at fault detection and NFPA 110 Level 1 compliance.
Cooling system – Standard integral set-mounted radiator system, designed and tested for rated ambient temperatures, simplifies facility design requirements for rejected heat.
Enclosures – Optional weather protective and sound attenuated enclosures are available.
NFPA – The genset accepts full rated load in a single step in accordance with NFPA 110 for Level 1 systems.
Warranty and service – Backed by a comprehensive warranty and worldwide distributor network.

With this you can also explore different Cummins Generator before you buy any other generator set.

Specifications

GENERATOR SET SPECIFICATIONS

Governor regulation class ISO 8528 Part 1 Class G3 Voltage regulation, no load to full load ± 0.5% Random voltage variation ± 0.5% Frequency regulation Isochronous Random frequency variation ± 0.25% Radio frequency emissions compliance IEC 801.2 through IEC 801.5; MIL STD 461C, Part 9.

ENGINE SPECIFICATIONS

Design 4 cycle, in-line, turbocharged and charge air aftercooled Bore 159 mm (6.25 in) Stroke 159 mm (6.25 in) Displacement 19 L (1159 in3 ) Cylinder block Cast iron, 6 cylinder Battery capacity 1400 amps minimum at ambient temperature of 0 °C to 10 °C (32 °F to 50 °F) Battery charging alternator 70 amps Starting voltage 24 volt, negative ground Fuel system Cummins modular common rail Fuel filter Dual element, 10 micron filtration, spin-on fuel filters with 15 micron water separator Air cleaner type Dry replaceable element with restriction indicator Lube oil filter type(s) Fleetguard spin-on Standard cooling system High ambient radiator.

ALTERNATOR SPECIFICATIONS

Design Brushless, 4 pole, revolving field Stator 2/3 pitch Rotor Single bearing flexible disc Insulation system Class H Standard temperature rise 125 ºC standby Exciter type PMG (permanent magnet generator) Phase rotation A (U), B (V), C (W) Alternator cooling Direct drive centrifugal blower fan AC waveform total harmonic distortion < 5% no load to full linear load, < 3% for any single harmonic Telephone influence factor (TIF) < 50 per NEMA MG1-22.43 Telephone harmonic factor (THF) < 3.